Ad Number: 4408
Series: DMX Self-Supporting|
Model DMX-68N 68 foot DMX standard duty tower. Packaged complete with CBS-08
concrete base stubs, DM mast, top plate, rotor plate, TMCA clamp assembly
and all necessary hardware. Height includes mast.
Attractive tapered design.
“X” brace with beaded channel leg
Enhancements made to both leg profile and taper allow for easier
installation and improved tower structure
High strength galvanized steel construction
Eight foot sections
Sections 5 to 8 are 12 gauge, 1 to 4 are 16 gauge galvanized steel
Compact shipping package
Free standing installation
Ideal for amateur radio and industrial/commercial communications
Climb shields recommended
Designed to withhold impact load of a climber in case of a fall in
accordance with CSA-S37-13. See installation instructions for more
LOAD LIMITS: DMX Standard Duty Towers are designed to support up to 3
square feet (0.28 m2) projected wind area.**
NOTE: Never install a tower or tower section found to have missing or
damaged components. Only Wade replacement components or hardware may be used
on DMX products. Failure to exercise this caution can result in injury or
death. Consult distributors for replacement sections or parts if required.
* Towers have not been tested to be in compliance with other sections of
** Tower load limits are based on survival, and cannot be stamped by a
Tower Height: 68' (20.7m)
Wind Load: 3 sq.ft.
Skidded Dimensions: 101" L x 35" W x 29" H / Cubic Feet: 29.6 / Weight: 460
Unskidded Dimensions: 96" L x 29" W x 29" H / Cubic Feet: 23.7 / Weight: 400
||Ackert Supplies VE3SG
Reply to Ad